totes les categories

Inicieu la sessió / Registrar-se
/ Tancar sessió
Carro 0 article

Carret de compra 0 article

Part MFR # Quantitat
PRESENTAR (0)
Contacti amb nosaltres

Info@Y-IC.com

Català

Escolliu l'idioma

Llenguatge actual

Català

  • English
  • Deutsch
  • Italia
  • Français
  • 한국의
  • русский
  • Svenska
  • Nederland
  • español
  • Português
  • polski
  • Suomi
  • Gaeilge
  • Slovenská
  • Slovenija
  • Čeština
  • Melayu
  • Magyarország
  • Hrvatska
  • Dansk
  • românesc
  • Indonesia
  • Ελλάδα
  • Български език
  • Afrikaans
  • IsiXhosa
  • isiZulu
  • lietuvių
  • Maori
  • Kongeriket
  • Монголулс
  • O'zbek
  • Tiếng Việt
  • हिंदी
  • اردو
  • Kurdî
  • Català
  • Bosna
  • Euskera
  • العربية
  • فارسی
  • Corsa
  • Chicheŵa
  • עִבְרִית
  • Latviešu
  • Hausa
  • Беларусь
  • አማርኛ
  • Republika e Shqipërisë
  • Eesti Vabariik
  • íslenska
  • မြန်မာ
  • Македонски
  • Lëtzebuergesch
  • საქართველო
  • Cambodia
  • Pilipino
  • Azərbaycan
  • ພາສາລາວ
  • বাংলা ভাষার
  • پښتو
  • malaɡasʲ
  • Кыргыз тили
  • Ayiti
  • Қазақша
  • Samoa
  • සිංහල
  • ภาษาไทย
  • Україна
  • Kiswahili
  • Cрпски
  • Galego
  • नेपाली
  • Sesotho
  • Тоҷикӣ
  • Türk dili
  • ગુજરાતી
  • ಕನ್ನಡkannaḍa
  • मराठी
IniciProductesDLMSP-6-01
Essentra Components
DLMSP-6-01 Image
La imatge pot ser representació.
Vegeu les especificacions dels detalls del producte.

Essentra Components DLMSP-6-01

Número de peça: DLMSP-6-01
Fabricant / Marca: Alliance (Essentra Components)
Part de la descripció: BRD SPT SNAP LOCK NYLON 3/8"
Fulls de dades:
1.DLMSP-6-01.pdf ···

Fulls de dades

DLMSP Series Drawing.pdf
Estat RoHs: Cumple con RoHS
Pagament: PayPal / Credit Card / T/T
Forma d'enviament: DHL / Fedex / TNT / UPS / EMS
Compartir:
Copieu l'enllaç amb èxit
En estoc: 43997 Pcs Stock

Ship From: Hong Kong

Quantitat Preu unitari
1+ $0.2701
5+ $0.231
10+ $0.1928
25+ $0.1807
50+ $0.1731
100+ $0.1539
250+ $0.1462
500+ $0.1385
1000+ $0.1308
»

Enviaments en línia RFQ: Respostes ràpides, millors preus!

Si us plau, completeu tots els camps obligatoris amb la vostra informació de contacte. Feu clic "ENVIA SOL·LICITUD DE PRESSUPOST"
Ens posarem en contacte amb vosaltres aviat per correu electrònic. O envieu-nos un correu a: Info@Y-IC.com.
  • Especificacions
  • Manual de compres
  • Informació d’enviament
  • Control de qualitat i embalatge
  • Essentra Components DLMSP-6-01 especificacions tècniques, atributs, paràmetres i peces amb especificacions similars a Essentra Components DLMSP-6-01 .
    Atribut del producte Valor d'atributs
    Espesor do Panel de Soporte 0.062" (1.57mm) 1/16"
    Diámetro do orificio de soporte 0.152" (3.86mm)
    Serie Richco, DLMSP
    Paquet Bulk
    Tipo de montaxe Snap Lock
    Espesor do panel de montaxe 0.062" (1.57mm) 1/16"
    Diámetro do orificio de montaxe 0.152" (3.86mm)
    Atribut del producte Valor d'atributs
    Material Nylon
    Lonxitude: en xeral 0.657" (16.70mm)
    Tipo de suxeición Snap Lock
    características -
    Entre altura da placa 0.375" (9.53mm) 3/8"
    Número de producte base DLMSP
  • Política de devolucions
    Les devolucions s'han de sol·licitar dins dels 60 dies posteriors a la data de la factura i incloure:
    - Número de factura original
    - Fotografia de les peces
    - Breu explicació o informe de prova indicant el motiu de la devolució
    No s'acceptaran devolucions després de 60 dies. Els articles retornats han d'estar en l'embalatge original i en condicions de revenda. No s'acceptaran devolucions degudes a errors del client en el moment del pressupost o de la compra. Contacteu amb el servei d'atenció al client per obtenir l'autorització de devolució abans de l'enviament.
    Com comprar
    Admetem comandes tant en línia com fora de línia. Per obtenir orientació detallada sobre el procés de comanda, visiteu el següent enllaç:
    https://www.Y-IC.com/RFQ-Quote.htm
    Si teniu qualsevol problema, no dubteu a contactar amb el nostre equip d'atenció al client per obtenir assistència.
    Pagament
    Acceptem els següents mètodes de pagament:
    - T/T per avançat (transferència bancària)
    - Western Union
    - Targeta de crèdit / Visa / Mastercard / PayPal
    Tingueu en compte que els clients són responsables de les despeses d'enviament, comissions bancàries, aranzels i impostos.

  • Període de lliurament
    Els paquets es programaran per al lliurament dins d’1-2 dies després que tots els articles hagin arribat al nostre magatzem. Els articles en estoc s’enviaran en un termini de 24 hores. El temps de lliurament varia segons el mètode d’enviament i la destinació.
    Seguiment de l’enviament
    Un cop els components siguin lliurats, el número de seguiment us serà enviat per correu electrònic immediatament. També podeu trobar el número de seguiment al vostre historial de comandes.
    Tarifa d’enviament
    Les tarifes d’enviament es determinen segons la mida, el pes i la destinació del paquet. YIC ofereix opcions d’enviament competitives a través de transportistes líders com DHL, FedEx i UPS. A més, oferim l’opció perquè els clients utilitzin els seus propis comptes d’enviament per a la facturació directa.

  • Control de qualitat (QC)

    Tots els productes estan subjectes a estrictes procediments d’inspecció d’entrada i control de qualitat.
    Garantim l’autenticitat de les peces, les especificacions correctes i un rendiment fiable mitjançant proves estandarditzades i la millora contínua dels processos.
    Garantia de qualitat

    Embalatge

    Protecció antiestàtica ESD.
    Tots els productes s’embalen en bosses antiestàtiques i s’envien amb protecció antiestàtica ESD. L’etiqueta de l’embalatge extern ESD inclourà la informació de la nostra empresa: número de peça, marca i quantitat.

    Inspeccionem totes les mercaderies abans de l’enviament per assegurar-nos que estan en excel·lents condicions i verifiquem que les peces siguin noves, originals i compleixin les especificacions del full de dades. Després de confirmar que tot està en ordre, embalem els articles de manera segura i els enviem mitjançant servei exprés internacional.

Producte relacionat

DLMSP-2-01

DLMSP-2-01

BRD SPT SNAP LOCK NYLON 1/8"
DLMSPM-10-01

DLMSPM-10-01

BRD SPT SNAP LOCK NYLON 5/8"
DLMSP-4-01

DLMSP-4-01

BRD SPT SNAP LOCK NYLON 1/4"
DLMSPM-12-01

DLMSPM-12-01

BRD SPT SNAP LOCK NYLON 3/4"
DLMSP-7-01

DLMSP-7-01

BRD SPT SNAP LOCK NYLON 7/16"
DLMSP-8-01

DLMSP-8-01

BRD SPT SNAP LOCK NYLON 1/2"
DLMSPM-18-01

DLMSPM-18-01

BRD SPT SNAP LOCK NYLON 1 1/8"
DLMSP-24-01

DLMSP-24-01

BRD SPT SNAP LOCK NYLON 1 1/2"
DLMSP-5-01

DLMSP-5-01

BRD SPT SNAP LOCK NYLON 5/16"
DLMSP-22-01

DLMSP-22-01

BRD SPT SNAP LOCK NYLON 1 3/8"
DLMSP-16-01

DLMSP-16-01

BRD SPT SNAP LOCK NYLON 1"
DLMSP-3-01

DLMSP-3-01

BRD SPT SNAP LOCK NYLON 3/16"
DLMSP-18-01

DLMSP-18-01

BRD SPT SNAP LOCK NYLON 1 1/8"
DLMSPM-13-01

DLMSPM-13-01

BRD SPT SNAP LOCK NYLON 13/16"
DLMSPM-16-01

DLMSPM-16-01

BRD SPT SNAP LOCK NYLON 1"
DLMSPM-2-01

DLMSPM-2-01

BRD SPT SNAP LOCK NYLON 1/8"
DLMSP-9-01

DLMSP-9-01

BRD SPT SNAP LOCK NYLON 9/16"
DLMSPM-14-01

DLMSPM-14-01

BRD SPT SNAP LOCK NYLON 7/8"
DLMSP-20-01

DLMSP-20-01

BRD SPT SNAP LOCK NYLON 1 1/4"
DLMSP-14-01

DLMSP-14-01

BRD SPT SNAP LOCK NYLON 7/8"

Revisió dels usuaris

  • Firm***eGarage

    Great MCU for a fairly demanding embedded project. We’re using the display interface, external memory, and several communication peripherals, and performance has been smooth throughout development.

    2026/09/28

  • Powe***pplyDoc

    Bought this capacitor for a DC-link section in an industrial power supply. Physical condition was good, measurements were reasonable before installation, and the repaired supply is back in service.

    2026/09/23

  • Volt***RailLab

    The regulator works well and the output rail is stable. Soldering the small package took a little more care than expected, but electrically I have no complaints.

    2026/09/15

  • RFID***kshop

    Used this part while repairing an RFID reader assembly. Detection performance returned to normal after replacement and has remained consistent during repeated tag tests.

    2026/09/9

  • Moti***trlDave

    Good replacement controller for an existing motor-control board. Flashing went smoothly and the PWM and control functions behaved normally during testing. Saved us from replacing the complete assembly.

    2026/09/3

  • Jame***rter

    Configuration memory worked flawlessly with our FPGA platform. Programming reliability has been excellent across multiple development boards.

    2026/08/25

  • FA_P***ects

    This FPGA offered exactly the resources our design required. Compilation, programming, and verification all completed without issues.

    2026/08/21

  • Logi***gineer

    Excellent FPGA for medium-complexity designs.

    2026/08/12

  • Digi***Scope

    Used this FPGA in a custom signal acquisition board. Resource utilization and compilation results were both very satisfying.

    2026/08/6

  • Noah***hardson

    Good transformer driver for isolated power supplies. Startup was smooth, although layout recommendations in the datasheet should be followed carefully.

    2026/07/29

  • Wire***sBuilder99

    Good networking processor for embedded communication systems. Stable operation and sufficient performance for wireless gateway applications.

    2026/07/21

  • Haro***urner

    Good FPGA for control and signal applications. Resource availability was suitable for my project and operation has been reliable.

    2026/07/14

  • Data***terLogic

    Excellent FPGA for demanding signal processing workloads. Resource utilization and performance exceeded expectations in our prototype system.

    2026/07/9

  • Elec***Mike_FR

    Good capacitor quality. Measurements were close to specifications and performance remained stable in a power filtering application.

    2026/06/29

  • Andr***_Keller

    Good MOSFET for compact power applications. Low heat generation and consistent switching performance in my DC power board.

    2026/06/25

  • Powe***b_Engineer

    Excellent power MOSFET for high-voltage switching applications. Switching characteristics are predictable and device temperatures stayed within limits.

    2026/06/15

  • Marc***lectronics

    This FPGA has been working well in an image processing application. Configuration completed successfully and I have not experienced any reliability issues.

    2026/06/11

  • Sato***Electronics

    Reliable DSP controller for motor and signal applications. Performance remained stable and integration with existing hardware was straightforward.

    2026/06/5

  • FPGA***ris

    This FPGA worked exactly as expected. Used for signal processing and high-speed data control. Configuration completed without issues and timing closure was easier than expected.

    2026/05/28

  • Robe***lark

    Excellent MCU for real-time control and power applications. Stable and fast processing.

    2026/05/22

  • Geor***cott

    Works fine as a signal component in timing circuits. No issues so far.

    2026/05/12

  • Oliv***arris

    good communication

    2026/05/8

  • Bria***lson

    Reliable FPGA. Worked smoothly in my MCU + signal integration project.

    2026/04/28

  • Jess***Miller

    It works well in my FPGA signal processing setup. Performance is stable and meets the spec without issues so far.

    2026/04/20

  • Powe***sign_Guy

    LM5145RGYR works fine in a DC-DC power design. Efficiency is good, but layout needs to be carefully optimized.

    2026/04/17

  • Powe***ive_

    Used the FF900R12IP4 in an automotive inverter project. Power handling is solid and thermal performance is stable under load.

    2026/04/8

  • Vipe***rcuit

    One unit failed during initial power-up, but the rest were fine. Mixed experience overall.

    2026/03/31

  • Hiro*** T.

    Perfect replacement part. My system worked immediately after installation.

    2026/03/23

  • Yuki***

    Works very well. I used AD8108ASTZ for video switching project. Stable and no noise problem.

    2026/03/20

  • Jaso***.

    Used the AD8108ASTZ in a video routing board and it worked perfectly. Clean switching and no noticeable signal degradation.

    2026/03/9

  • Devo***.

    Exactly as described. Great price for a pack of 10.

    2026/03/4

  • Alex***

    Moderate quality chip. Works fine at room temperature, but in high temp conditions it seemed to drift. Not terrible, but not premium either.

    2026/02/28

  • Core***nalSourcing

    Service was efficient and polite. Components were packed well and labels were clear. Appreciated the attention to detail.

    2026/02/3

  • Nano***icBuyer

    Good.

    2026/01/28

  • Quan***Sourcing

    Clear communication and quick updates during the whole process. The parts arrived as described. Very satisfied with the service.

    2026/01/19

  • Fusi***oreBuyer

    Prompt replies. The order process was smooth and the delivery matched the promised timeline. Satisfied with the service.

    2026/01/16

  • Opti***pSolutions

    Good

    2026/01/9

  • Tech***cuitBuyer

    quick answer to our request

    2025/12/29

  • Nova***ponentHub

    Recommended, trusted

    2025/12/25

  • Grid***ion

    Our procurement team relies on YIC for sourcing discontinued parts. They consistently deliver quality and handle cross-references when needed. Great value and support.

    2025/12/17

  • Terr***nse Microtech

    Excellent service! We urgently needed a batch of TMS320LF2406APZA for a critical production line. YIC not only offered competitive pricing but also ensured on-time delivery. We’ll definitely reorder.

    2025/12/10

  • Tita***is Industrial

    Our urgent production run was saved thanks to their stock of EOL components. Definitely a supplier we will use again.

    2025/12/4

  • Mich***_Embedded

    Very professional supplier – confirmed stock quickly and kept me updated until delivery.

    2025/11/25

  • ches***_y

    Our EMS line was waiting on MAX3030EEUE+T RS-422 drivers. IC-Components split the shipment—partial now, balance next week—so the SMT schedule didn’t slip. Practical and proactive.

    2025/11/20

  • ca_c***onents_ashley

    The goods work as expected and the quote was clear. Only gripe: website showed ‘thousands in stock’ but true on-hand was zero; they turned it around via factory in 5 days and kept me posted. Fair recovery.

    2025/11/11

  • Quin***avis

    Needed 250 pcs of LT4256-2IS8#PBF on short notice. They split reels for me, kept the MOQ reasonable, and sent full traceability docs + RoHS/REACH. Will buy again.

    2025/11/3

  • Jaso***ouis

    Solid experience end to end. Order arrived faster than expected and the components came in moisture barrier bags with traceable labels.

    2025/10/30

  • AmpC***

    The price is good, very satisfied with this purchase.

    2025/10/22

  • Eric***mmons

    Great experience overall. The order was processed quickly, and the quality of the electronic components met our expectations.

    2025/10/16

  • Jona***n Brooks

    Fast delivery and professional service.  Great experience from order to receipt.

    2025/10/9

  • Jess***

    Very professional supplier. I received my package quickly, and they were well packed. The team followed up until delivery was complete.

    2025/09/28

  • Sher***

    Fast delivery

    2025/09/17

  • Antw***Shawn

    I found what I needed, great product

    2025/09/9

  • Shir***neFrame

    対応が良くて返信も早いです。発送も早くて助かりました。また買います。

    2025/09/1

  • 7ama***

    Seller was super nice, product quality is okay, and replies came really fast. Overall, shopping here felt easy and pleasant, would be happy to buy again.

    2025/08/25

  • Zinn***Clarke

    Fast shipping, great customer service, and the item came super well-packed. Loved it!

    2025/08/20

  • Josh***Alexander

    Outstanding customer support! They’re extremely helpful!

    2025/07/3

  • Lily***nchez

    Everything is great!

    2024/12/18

  • Gabr*** Rivera

    Great service! Fast shipping! Highly recommended!

    2023/06/21

  • Zoey***ice

    The goods were delivered on time and well packaged. Communication with customer service was smooth and easy.

    2023/04/27

  • Madi*** Morgan

    We're very satisfied with our purchasing experience at Y-IC, and we're glad to have Jimmy as our point of contact. He responds quickly and always provides competitive pricing.

    2022/07/1

  • Rile***eterson

    We had a great experience, with excellent communication and customer support, competitive pricing, and fast delivery.

    2021/03/4

  • Anth*** Butler

    I had an excellent experience with Y-IC. Their service was outstanding, and communication was always clear and friendly. All of my questions were answered promptly and professionally. Highly recommended!

    2020/09/10

  • Chlo***ughes

    This is the fourth time I've purchased components from here. The quality and service are excellent! My contact is very responsive and highly professional!

    2020/01/23

0 Articles

Publica una revisió

Hola , Benvingut a comentar aquest producte
Qualificació *
5.0

Limiteu la observació a 500 paraules

La vostra informació personal s’amagarà

  • Fabricants destacats
  • Alliance (Essentra Components)KEMETAMI Semiconductor/onsemiDiodes IncorporatedAMD XilinxCypress Semiconductor (Infineon Technologies)Fairchild (onsemi)Micron Technology
  • Blogs i publicacions

La nostra força bàsica Les nostres certificacions i avantatges de la indústria

DLMSP-6-01 Image

DLMSP-6-01

Essentra Components

BRD SPT SNAP LOCK NYLON 3/8"
Quantitat*
Preu objectiu (USD)
RFQ